Table of Contents
Advertisement
Quick Links
BY
CPL 100
Owner's Manual
Keyless Entry Upgrade
Security System
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY
PRECAUTIONS may not apply. Please see your installing dealer for more information.
1
Advertisement
Table of Contents
Related Manuals for Code Alarm GUARDIAN CPL 100
Summary of Contents for Code Alarm GUARDIAN CPL 100
- Page 1 CPL 100 Owner's Manual Keyless Entry Upgrade Security System IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply.
- Page 2 Table of Contents Features and Benefits ............... 3 System Functions ..............4 Arming the system Pre-arm mode Disarming the system Using valet mode When Your Security System is Triggered ....... 4 When Your Security System is Triggered, Continued .... 5 Attempted Intrusion identification Emergency Disarm Procedure ..........
- Page 3 Features and Benefits Two Easy-to-Use Weather-Resistant Remote Controls The upgrade security system utilizes your factory keyless entry remote controls and adds a complete vehicle security system while retaining factory functions. All Entrances Protected Opening any door or entrance protected by the security system triggers the vehicle’s horn and flashes the parking lights.
- Page 4 System Functions Arming the Security System To arm the system, exit the vehicle, close all doors, then press the LOCK button on your keyless entry remote control. The system will flash the parking lights 2 times, indicating the system is armed, and activated the starter disable feature.
- Page 5 When Your Security System is Triggered, Continued Attempted Intrusion Identification Pressing UNLOCK after a full 30 second trigger cycle has completed, the horn will honk 4 times and the LED will flash a number of times to indicate which input triggered the alarm. Turning on the ignition or pressing the valet/override button will reset the LED flashes, pressing the valet/override button will also honk the horn to match the LED flashes before it resets.
- Page 6 Code Systems, Inc. 36 Month Limited Warranty Code Systems, Inc. (the “Company”) warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workman- ship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product, (at the Company’s option) without charge for parts or repair labor.
- Page 8 Code Systems, Inc. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
Need help?
Do you have a question about the GUARDIAN CPL 100 and is the answer not in the manual?
Questions and answers