Table of Contents
Advertisement
6
Fig. 12
Gently pull back until wall seal is flush with the wall.
8
Fig. 14
Through plate into air tube, drill two holes and fix in place
using two self tapping screws n° 6 x 6mm long.
10
Fig. 16
Insert the aluminium flue pipe into white plastic outer flue,
making sure the aluminium pipe sits fully and centrally into
the flue terminal.
Sigma
7
Fig. 13
Position the wall plate on the wall. Fix plate to wall with the
square gasket between the wall and the plate use the large
diameter washers for the bolts ad screws.
9
Fig. 15
Cut the outer flue flush with the flange on the hanging plate.
11
15 mm
Fig. 17
Mark the aluminium flue pipe at the point it is flush with the
mounting plate. Add 15 mm to this mark and cut the
aluminium inner flue pipe at this point.
11
Advertisement
Table of Contents
