Table of Contents
Advertisement
6
Inductor unit
In the case of significant differences in tem-
perature or extended periods of use, the axis
movement of the welding nozzle and pressure
roller can shift.
To compensate for these changes, fine adjust-
ments can be made using the inductor unit.
Axis control:
1A, 1B Z-axis of roller
2A, 2B Z-axis of nozzle
3A, 3B X-axis of nozzle
4A, 4B Y-axis of nozzle
1A
1B
2A
2B
3A
3B
4A
4B
7
Displace-
1. Swiveling of the welding arm (pedestal)
ment of the
2. Skew
3. Height
welding arm
(pedestal)
4. Length
5. Width
1.1 Detach the nuts (8, A)
Control the clamping movement of the
roller
Control the opening movement of the
roller
Nozzle Z-axis
Control upward movement
Nozzle Z-axis
Control downward movement
Nozzle X-axis
Control extension movement
Nozzle X-axis Control retraction move-
ment
Nozzle Y-axis
Control extension movement
Nozzle Y-axis Control retraction move-
ment
on both sides.
2A
2B
3B
1A
1B
3A
4A
4B
43
Advertisement
Table of Contents
