Fluke 1736/FPC User Manual page 45

1736/1738
Users Manual
Energy costs
Enter the costs/kWh for demand energy. The energy costs are applied
to forward energy (positive energy) using the demand interval and can
be reviewed in the Logger detail screen Energy - Demand.
Energy costs can be entered using a resolution of 0.001. The currency
unit is changed in Instrument Settings. See Instrument Settings on
page 47 for more information.
This value is not available for load studies.
Description
Enter more details about the measurement, such as customer,
location, and load-rating plate data with the virtual keyboard. This
description field is limited to 127 characters.
After you download a logging session with Energy Analyze software,
use more advanced inputs to support line breaks and up to 1000
characters.
Logging Session Review
When a logging session is started, or when you review a completed
session, the Logging home screen is shown. During active recording,
this screen can be accessed when you push
40
1.800.561.8187 1.800.561.8187
Note
 .
www. www.
The Logger home screen shows the progress of an active recording.
Use  (Show Menu) to review the logging setup. On energy
studies, you can select one of the available overview screens:
•
Power
Screen provides access to V, A, Hz, + (A, Hz, + for load
studies), power, and energy
•
PQ Health (available on 1738 or 1736 with 1736/Upgrade or IEEE
519/Report license)
Screen provides access to Power Quality graphs, harmonics,
and events
•
Quality
Screen provides access to Power Quality graphs, harmonics,
and events
Power/Load Study Overview
The screen shows the overview chart with active power and PF for
energy studies and currents for load studies. Total energy is available
also in energy studies.
The screen updates with each new average calculation interval at a
maximum of every 5 seconds.
From the Logger home screen you have access to:
•
V, A, Hz, + (A, Hz, + for load studies)
•
Power
•
Energy
•
Details
information@itm.com information@itm.com
.com .com