LG A9T Series Owner's Manual page 29

pocket and charge it using the charging
station.
3
Press the release button and separate the
extension pipe.
4
Hang the nozzle on the nozzle hook.
Separating the Battery Pocket
Separate the battery pocket by pressing the PUSH
button on the bottom of the battery pocket and
sliding it upward off the mop nozzle.
WARNING
• Do not separate the water tank from the steam
mop nozzle or add water to the water tank while
the power is on or cleaning in progress. Doing so
may result in burns due to steam or hot water.
• Never turn the steam mop nozzle upside down,
tilt or shake it while the power is on, while
cleaning, or immediately after cleaning is
finished. Steam or hot water may leak and cause
burns.
• After cleaning, separate the mop pads from the
steam mop nozzle after letting it cool sufficiently.
Touching the steam mop nozzle or the mop pads
before they are sufficiently cooled may result in
burns.
• After steam cleaning, hot steam may become
water droplets and hot water may flow from the
inlet. After cooling the product sufficiently, clean
the nozzle and store the product in the charging
station.
NOTE
• If there is no water in the water tank, no steam
will be produced. Fill the water tank with water
and attach the pre wet mop pads before use.
• When the steam mop nozzle is turned on and left
in place, no steam will come out in order to
prevent damage to the floor.
OPERATION
29