Using The Steam Mop Nozzle - LG A9T Series Owner's Manual

OPERATION
22
1
Lift the front of the control panel located at the
top of the charging station.
2
To insert, align the battery with the outline of
the battery charger.
3
Press the battery down into the compartment.
NOTE
• The spare battery icon (
flashes during charging and remains on when
charging is complete.
• Insert the spare battery completely. If the spare
battery is inserted correctly, the spare battery
icon ( ) flashes.
*
) in the status display
*
• The battery pocket does not have a charging
function. Separate the battery from the battery
pocket and charge it using the charging station.
Using the Steam Mop
Nozzle
Before Using the Steam Mop
Nozzle
• The mop pads only rotate at one speed
regardless of what suction power setting the
product body is set to.
• To prevent product damage, the mop
attachment plate will automatically stop if there
are foreign objects stuck in the plate or if it is
subjected to a strong impact. Turn the appliance
off immediately and remove the foreign objects
or obstructions before resuming use.
• If you use only mop mode for a long time with
the suction off, the motor may overheat
(recommended duration of use: 80 minutes).
When the moter overheats, the overheating
prevention function is activated and the
appliance is automatically turned off. Use the
appliance after cooling the heat for about one
hour in a cool, well-ventilated place.
• When using the steam mode with a fully charged
battery in the battery pocket, it is recommended
to replace only two batteries if the batteries are
discharged and need to be replaced. If you use
the steam mode for a long time, the motor may
overheat and the product may turn off.
• If you hear a noise while mopping, the mop pad
may have dropped off the mop attachment
plate. Turn off the product immediately and
reattach the mop to the attachment plate before
resuming use.