Kränzle K 1050 P Operating Manual

Kränzle K 1050 P Operating Manual

High-pressure cleaner
Hide thumbs Also See for K 1050 P:

Advertisement

Quick Links

Operating manual
EN
High-pressure cleaner
K 1050 P
www.kraenzle.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K 1050 P and is the answer not in the manual?

Questions and answers

Summary of Contents for Kränzle K 1050 P

  • Page 1 Operating manual High-pressure cleaner K 1050 P www.kraenzle.com...
  • Page 2 Operating manual High-pressure cleaner K 1050 P Operating manual! This manual is a translation of the original manual. Read and conform safety instructions before use! Technical data will be found in the Spare parts list. Please be aware that the spare part list is part of the operating manual.
  • Page 3: Table Of Contents

    Your choice has fallen on an absolute quality product! adhere to the instructions may cause excessive wear or total Kränzle high-pressure cleaners are characterized by their convenient breakdown of the K 1050 P. and compact design as well as their high suitability for everyday use. Warning!
  • Page 4: Safety Notes

    Safety notes Safety notes - This is prohibited! User operating the high-pressure cleaner should wear the necessary protective Safety devices serve to protect the user and must never be de-activated or their clothing, i.e. waterproof clothing, rubber boots, safety goggles, ear protection function bypassed.
  • Page 5 Safety notes - This is prohibited! Description of high-pressure cleaner Design The K 1050 P cleaner is a portable high-pressure cleaner with an advanced Never direct the high-pressure jet at power sockets arrangement system. Please see construction scheme for more details.
  • Page 6: Description Of High-Pressure Cleaner

    (for cleaning façades, patios, 1. Kränzle high-pressure cleaner garden equipment, tools, vehicles and machinery as well as building structures). K 1050 P It is not intended for commercial use. Environmental, refuse disposal and water protection regulations must be observed! 2.
  • Page 7: Functional Details

    Functional details Functional details Please note: Lack of water Insufficient quantity of electricity Lack of water occurs more often than you If there are too many collectors in your probably believe. The more powerful a high- proximity connected to the network at the pressure cleaner is the greater is the danger same time, the available voltage and the that a lack of water occurs.
  • Page 8 Functional details Functional details Water and cleaning system Motor overload protection Water can be connected at mains pressure to the high-pressure pump. The water Motor is protected against overload by means of a motor protection switch. is then forced under pressure by the high-pressure pump to the lance. The high- In case of motor overload or blocking, the motor of the high-pressure cleaner pressure jet is formed by the nozzle at the end of the lance.
  • Page 9: Putting Into Operation

    After insertion of the lance, release retaining sleeve and make sure that the Neither set up or operate the K 1050 P in rooms where there is a risk of lance is in a secure position. fire or explosion nor put it into puddles. Do not use the high-pressure Grease quick release nipple regularly cleaner under water.
  • Page 10 Putting into operation Putting into operation Check water inlet filter for cleanliness Connect to circuit (see technical data). prior to putting the high-pressure cleaner into operation. When inside filter is contaminated, remove filter and follow step 7.1. If the sieve is dirty, water cannot get through and pressure will not build up.
  • Page 11: Taking Out Of Operation

    Taking out of operation Small repairs - do it yourself Switch off the high-pressure cleaner Problem No water from nozzle although the high-pressure cleaner is running. 2. Cut off the water supply Open the safety trigger gun catch briefly until the pressure is released Cause Most likely the nozzle is blocked.
  • Page 12 Small repairs - do it yourself Small repairs - do it yourself Problem Problem Irregular jet from nozzle. After closing the safety trigger gun the high-pressure cleaner keeps switching on and off. Cause Possible cause No. 1 Most likely the valves are soiled or sticky. Leckage.
  • Page 13: Small Repairs - Do It Yourself

    Small repairs - do it yourself EU Declaration of Conformity We here by declare that the design of Problem the high-pressure cleaners: K 1050 P After closing the safety trigger gun the high-pressure cleaner keeps switching on and off. Nominal flow: 450 l/h Possible cause No.
  • Page 14: Kränzle Accessories

    Kränzle accessories Kränzle accessories Rotating washing brush BRUSH light 210 mm Stainless steel extension Filth killer lance light Brush head ∅ 180 mm 400 mm Nozzle system 03 Nozzle size 2.5 mm Item no.: 42403-03 Item no.: 12800 Floor washer Round Cleaner UFO light ∅...
  • Page 15: Warranty

    Warranty Notes This Kränzle high-pressure cleaner is solely designed for home users for typical applications around the house and garden (for cleaning façades, patios, garden equipment, tools, vehicles and machinery as well as building structures). It is not intended for commercial use. The warranty obligation of Josef Kränzle GmbH &...
  • Page 16 Notes Notes...
  • Page 17 Josef Kränzle GmbH & Co. KG Rudolf-Diesel-Straße 20 89257 Illertissen (Germany) sales @ kraenzle.com Made Germany www.kraenzle.com...

Table of Contents