Advertisement
36
INSTRUCTION HANDBOOK
143
By means of the torx key (size 15) unscrew the
screw fixing the RTC lever to the operating
mechanism.
145
By means of the flat screwdriver push the shaft
support as indicated by the arrow.
147
Push down the rod using the hammer.
144
Manually remove the RTC lever.
146
Put the circuit breaker with the left side up and
insert the rod in the hole left by the cover cap.
148
Put the circuit breaker with front up and push the
rod as indicated by the arrow until the pin comes out
from the hole left by the cover cap on the right side
of the circuit breaker and after remove the rod.
Advertisement
