Advertisement
34
INSTRUCTION HANDBOOK
6.8 PHASE 8 – OPERATING MECHANISM
Tools
Actions to be performed
Flat screwdriver
131
By means of the flat screwdriver remove the
cover cap on the left side of the circuit breaker.
Cutter
Pliers
Allen key
4mm
Torx key
No. 6
133
No. 10
No. 15
By means of the pliers remove the pin located
No. 20
in hole left by the cap cover.
No. 25
Hammer
Rod Ø5mm
Min. 200mm
135
By means of the cutter start removing the
protection plate located on the right side of
circuit breaker and manually complete the
operation.
132
By means of the cutter start removing the
protection plate located on the left side of
circuit breaker and manually complete the
operation.
134
Manually remove the open lever and the
withdrawable pin located on the right side of
the circuit breaker.
136
Manually charge circuit breaker springs.
Advertisement
