Honda Deluxe 2014 Manual page 104

Engine Oil u Changing Engine Oil & Filter
6. Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
102
Rubber
seal
Filter
Filter
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install a new oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 21 lbf·ft (29 N·m, 3.0 kgf·m).
10. Fill the crankcase with the recommended
oil ( P. 80) and install the oil fill cap.
2
Required oil
When changing oil &
engine oil filter:
4.1 US qt (3.9 liters)
When changing oil only:
3.8 US qt (3.6 liters)
11. Check the oil level.
12. Check that there are no oil leaks.
P. 99
2