Removing A 3½ Inch Drive - Fujitsu ESPRIMO D55 Series Operating Manual

Removing a 3½ inch drive
► Remove the casing cover (see Chapter
► Fold out the drive cage (see Chapter
► Disconnect any cables connected to the drive.
► Undo the screws (a or b, depending on the type of drive).
► Push the drive a few centimetres out of the bay in the direction of the arrow (1).
► Pull the drive completely out of the bay in the direction of the arrow (2).
► If you are not installing a new drive, change the drive cover if necessary (see
chapter "Changing the drive cover", Page
► Fold the drive cage into the closed position again (see chapter
► Fit the casing cover onto the casing again (see chapter
If necessary, you must adjust the entry for the drive accordingly in the BIOS Setup.
Fujitsu
"Removing the casing cover", Page
"Opening the drive cage", Page
a
1
35).
"Reattaching the casing cover.", Page
System expansions
32).
43).
b
2
"Closing the drive cage", Page 44).
33).
55