Installing And Removing Drives In The Middle Bay (Optional); Installing A 3½ Inch Drive - Fujitsu ESPRIMO D55 Series Operating Manual

Installing and removing drives in the
middle bay (optional)
In the middle bay you can either install one 3½ inch or two 2½ inch drives using
a 3½ inch adapter. Accessible drives here are for example SmartCard or Multicard
readers. Non-accessible drives are hard disks or SSDs.
Fixture in the casing is always using screws.
Operation of a SmartCard reader with a RFID reader is not permitted in Taiwan.
The following procedure describes installation and removal using the example of a Multicard reader.
The approach is the same for all variants. Any differences are indicated accordingly.
Installing a 3½ inch drive
• The casing cover is removed (see chapter
• A suitable drive cover is mounted (see chapter
► Fold out the drive cage (see chapter
► When installing 2.5" HDDs/SSDs or a SmartCard reader: Connect the cables
to the drive before you slide it into the bay.
On the multicard reader, one end of the cable is already fixed to the reader.
Fujitsu
"Removing the casing cover", Page
"Changing the drive cover", Page
"Opening the drive cage", Page
a
System expansions
32).
35).
43).
b
1
53