Partsidentification
(Front)
A Main unit
1 Charging indicator lamp
2 Nozzle socket
3 Nozzle release button
4 Switch
5 Usage line (
mark)
6 Tank
7 Water supply cap
►
Note
There may be some liquid remaining inside the main
appliance (tank, water suction tube, etc.), but this is remaining
distilled water that was used for the performance (water flow)
test, so there are no health concerns.
4
EW-DJ40_CIS.indb
4
(Back)
8 Appliance socket
9 Nozzle storage
compartment
: Water suction tube
B Nozzle (x1)
C Charging adaptor
►
Beforeusingtheappliance
Initially bleeding may occur even with healthy gums. This is
caused because the gums are not used to such stimulation.
The bleeding will normally stop within 1 or weeks of use.
There may be a problem with the gums (periodontal disease,
etc.) if the bleeding continues for over weeks. In such cases,
stop using the appliance and consult the dentist.
Chargingtheappliance
•
Charge the appliance at 15 to 5 °C room temperature.
•
Usage time may be shorter when charging in lower
temperatures (under 15 °C). Also, it may not charge in very
low temperatures (under 0 °C).
1
1
TurntheswitchtoOFF.
2
2
Storethemainunit.
3
3
Inserttheapplianceplugsecurely
intotheappliancesocket.
•
Insert the appliance plug after wiping any
water that may be on the socket.
4
4
Insertthechargingadaptorsecurelyintothe
poweroutlet.
2009/08/22
9:42:05