Energy Saver Feature - HP HC241 User Manual

Table A-3 Preset timing resolutions (continued)
Preset
2
3
4
5
6

Energy saver feature

The monitor supports a reduced power state. The reduced power state will be entered into if the monitor
detects the absence of either the horizontal sync signal or the vertical sync signal. Upon detecting the
absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light turns
amber. When the monitor is in the reduced power state, the monitor will utilize <0.3 watts of power. There is
a brief warm-up period before the monitor will return to its normal operating state.
Refer to the computer manual for instructions on setting the energy saver mode (sometimes called power
management feature).
NOTE: The above power saver feature works only when the monitor is connected to a computer that has
energy saver features.
By selecting the settings in the monitor's Sleep Timer utility, you can also program the monitor to enter into
the reduced power state at a predetermined time. When the monitor's Sleep Timer utility causes the monitor
to enter the reduced power state, the power light blinks amber.
Timing name
720p60
576p
720p50
1080p60
1080p50
Pixel format
1280 × 720
720 × 576
1280 × 720
1920 × 1080
1920 × 1080
Horz freq (kHz) Vert freq (Hz)
45.000 60.00
31.250 50.00
37.500 50.00
67.500 60.00
56.250 50.00
Energy saver feature 23