Timer Operation; On/Off Timer Operation - Daikin FTX30WVJU9 Operation Manual

TIMER Operation

ON/OFF TIMER Operation

NOTE
Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• When using the ON/OFF TIMER to start/stop operation, the actual operation start/stop time may differ from the time set. (Maximum of about
10 minutes)
• The ON/OFF TIMER remembers the time set previously.
• The ON TIMER will begin operation in the settings used previously for operation mode, temperature, airflow rate, and airflow direction.
In the following cases, set the timer again.
• After the circuit breaker has turned off.
• After a power failure.
• After replacing the batteries in the remote controller.
19
Timer functions are useful for automatically switching the air conditioner on or off
in the morning or at night. You can also use the ON TIMER and OFF TIMER
together.
To use ON TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1.
Press
"
" " blinks.
• " " and day of the week disappear from the LCD.
2.
Press until the time setting reaches the point
you like.
• Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the setting rapidly.
3.
Press
• " " and setting time are displayed on the LCD.
• The TIMER lamp lights orange.
Display
To cancel ON TIMER operation
Press .
• " " and setting time disappear from the LCD.
• " " and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
Page 10
.
" is displayed on the LCD.
again.
Page 5