Daikin FTX30WVJU9 Operation Manual page 11

NOTE
Fahrenheit/Celsius display change function of remote controller
• The set temperature may increase when the display is changed to Celsius from Fahrenheit, because a fraction of 0.5°C is rounded up.
• Example: A set temperature of 65°F (equivalent to 18.5°C) will be converted into 19°C.
When the display is changed to Fahrenheit again, the set temperature will be converted into 66°F (equivalent to 19°C) instead of the
original set temperature (65°F) but a set temperature of 66°F (equivalent to 19°C) will be converted into 19°C with no temperature
change.
Note on setting the clock
• If the indoor unit's internal clock is not set to the correct time, the ON/OFF TIMER and WEEKLY TIMER will not operate punctually.
Turn on the circuit breaker
• After the power is turned on, the flaps of the indoor unit open and close once to set the
reference position.
To set the clock
1.
Press
.
2.
Press to set the current day of the week.
Display
MON
TUE
WED
THU
FRI
SAT
SUN
3.
Press .
4.
Press to set the clock to the present time.
• Holding down or
5.
Press .
• Point the remote controller at the indoor unit when pressing the buttons.
" " is displayed on the LCD.
"
" and " " blink.
Day of the week
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
" " blinks.
rapidly increases or decreases the displayed time.
" " blinks.
Read Before Operation
10