Table of Contents
Advertisement
Remove the display assembly:
1.
Disconnect the display cable (1) from the ZIF connector on the system board.
2.
Disconnect the wireless antenna cables (2) from the WLAN module.
3.
Disconnect the camera cable (3) from the ZIF connector on the system board.
4.
Remove the six Phillips M2.0 × 5.0 screws (1) that secure the display assembly to the computer.
5.
Open the display to rotate the hinges (2).
6.
Separate the display from the computer (3).
To install the display assembly, reverse this procedure.
Top cover
The top cover remains after removing all other spare parts from the computer.
46
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
