NoiseKen 03-00074A Instruction Manual

03-00074A Probe Stand Adaptor for GT-30R(A) Instruction Manual
1. REFACE
Thank you for your purchasing Probe Stand Adaptor for GT-30R(A) MODEL:
03-00074A. This product is an adaptor for mounting the discharge gun GT-30R on the
probe stand. Please read this manual for safe usage before using this product.
***For details, such as the precautions for safe usage, warranty rules of Noise
Laboratory's products, and so on, read the instruction manual of the main body of the
ESD simulator or the discharge gun.
2. INSTRUCTIONS
・ This product may only be used by a person who understands well the ESD immunity test
as well as this manual and is able to use this product safely.
・ Be sure to apply the pins of the adaptor to the installation holes of the discharge gun
properly and fix them.
3. HOW TO MOUNT
・Insert the tip part of the probe stand into the hole of the adaptor, rotate it 90° clockwise to
set it to the groov, and fasten the nut by your hand to fix the adaptor.
・ Apply the two pins of the adaptor to the hole of the discharge gun.
・ Close the lid and rotate the knob by your hand to fix the discharge gun.
Pin (two spots)
Adaptor
Nut
Knob
Edition1.03
AEC00266-00E-0D