Table of Contents
Advertisement
Portable Case Assembly
It is important to perform the PiranhaMAX portable case assembly tasks in
order, referring to the step-by-step procedures that represent the following
main assembly tasks:
• Assembling the PiranhaMAX mount
• Assembling the base and handle
• Assembling the control head to the base and handle
• Routing the cables in the base
• Assembling the portable case
• Charging and installing the battery
• Assembling the transducer mounting bracket
• Stowing the portable transducer and battery charger into the
portable case.
When you are done, the control head and the transducer will be part of the
portable case assembly, and you will be ready to take your portable case to the
boat for final setup.
Supplies: In addition to the hardware supplied with your installation kit, you
will need a hammer, Phillips screwdriver, socket wrench, and a rope or bungee
cord.
21
Portable Case Assembly
Advertisement
Table of Contents
