Subscribe to Our Youtube Channel
Related Manuals for Humminbird Legend 1000
Summary of Contents for Humminbird Legend 1000
- Page 1 Operations Manual Operational instructions for Humminbird Legend 1000 Series including the Legend –1000, 1005, 1000 Deep and 1005 Deep...
-
Page 2: Thank You
We encourage you to read this operation manual carefully in order to get full benefit from all the features and applications of your Humminbird product. Contact our Customer Resource Center at either 334-687-0503 or www.humminbird.com. -
Page 3: Table Of Contents
Customer Support ........15 Section 3: SPECIFICATIONS Legend 1000/1005 Specifications ......16 Legend Specifications. -
Page 4: Section 1: Using The Legend 1000 Series
2' EGEND ERIES to 600' (2000' for the Legend 1000 Deep and 1005 Deep Models). Actual depth capability depends on many factors such as bottom hardness, water conditions, and transducer installation. All sonar units typically read to deeper depths in fresh water than in salt water. -
Page 5: User Interface
In UTOMATIC selects the depth range. In ERIES ONTROL depth range is selected by the user. USING THE LEGEND 1000 SERIES USER INTERFACE / KNOBS / LCD DISPLAY knob has ANGE for specific uses... -
Page 6: Chart Window
USING THE LEGEND 1000 SERIES REAL TIME SONAR™ / CHART WINDOW The sonar returns received by the displayed along the depth range scale in a ™ (RTS) W ONAR INDOW HART INDOW displays new sonar information within the transducer cone in an expanded, easy-to-see format; the... - Page 7 When the boat and the fish are moving quickly relative to each other, the fish creates a shorter arch. A partial arch forms when the fish does not move through the entire cone angle. USING THE LEGEND 1000 SERIES Bait fish Fish Arch Partial Fish...
-
Page 8: Control Panels
Setting Name ANEL method used by the Legend 1000 Series to track the Readout bottom, select depth ranges and graph the information on the LCD display. The Mode is selected by changing the Control Panel setting to Auto, Manual, or BTM Lock (Bottom Lock). -
Page 9: Automatic Mode
Optimizing the Depth Range for Sonar Targets When the image of the bottom does not appear close to the bottom of the LCD display, the Legend 1000 Series is not fully optimizing the display to show sonar targets, such as fish, that are very close together. To... -
Page 10: Bottom Lock Zoom Mode
1000 S ERIES To adjust the depth ranges manually, follow these steps: 1. Make sure the Legend 1000 Series is operating in Manual mode. 2. Push the Range knob. An adjustment indicator appears at the location of the Lower Depth Range, indicating that it is ready for adjustment. -
Page 11: Chart Speed
HART INDOW The Light setting defaults to factory settings after the Legend 1000 Series is turned off. The factory setting full at power up and automatic decrease to Contrast enhances the ONTRAST viewability of the LCD by making it darker or lighter. -
Page 12: Surface Clutter
USING THE LEGEND 1000 SERIES SURFACE CLUTTER / WHITE LINE / FILTER / DEPTH ALARM / TEMP ALARM Surface Clutter eliminates URFACE LUTTER most sonar returns near the water surface caused by trapped air, boat wakes and temperature inversions. Most surface clutter appears on the display because the strongest sonar returns come from the shallowest objects. -
Page 13: Temp Alarm
OWER Legend 1000 Series is turned off. The factory setting ° F/ 22° C. Fish Alarm (Deep Models only) LARM... -
Page 14: Simulator
Simulator Mode if a transducer is connected. When operating with the Simulator on and without a transducer connected, the Legend 1000 Series does not remember any changes to settings. The Simulator setting defaults to factory settings after the Legend 1000 Series is turned off. -
Page 15: Troubleshooting
TROUBLESHOOTING Repairs Do not attempt to repair the EGEND There are no user-serviceable parts inside, and special tools and techniques are required for reassembly to ensure the waterproof integrity of the housing. Repairs should be performed only by authorized Techsonic technicians. Before You Call Customer Support Many requests for repair received by Techsonic involve units that do not actually need repair. -
Page 16: Warranty
MAINTENANCE AND WARRANTY TROUBLESHOOTING / WARRANTY / SERVICE POLICY 5. The unit comes on before I press POWER, and won’t turn off. Check the transducer cable—if the outer jacket of the cable has been cut and the cable is in contact with bare metal, you need to disconnect the cable from the unit, then repair the cut with electrical tape. -
Page 17: Customer Resource Center
We reserve the right to deem any product unserviceable when replacement parts are no longer available or impossible to obtain. This Service Policy is valid in the United States only. This applies only to Humminbird products returned to our factory in Eufaula, Alabama. This Service Policy is subject to change without notice. -
Page 18: Section 3: Specifications Legend 1000/1005 Specifications
SPECIFICATIONS 1000/1005 SPECIFICATIONS Operating Frequency ....... 200 kHz Power Output ..... . .4000 Watts (Peak to Peak) .
Need help?
Do you have a question about the Legend 1000 and is the answer not in the manual?
Questions and answers