Xkm 3200 Wl Plt; Plinth - Miele PDR 910 EL Installations Plan

XKM 3200 WL PLT The optional Miele communication module can be used to establish a

Plinth

data connection between a Miele Professional machine and a data
processor in accordance with the Ethernet or WiFi standard.
This communication module fits into the communication slot which is
a standard feature on all machines. The communication module of-
fers the option of intelligent app-based communication with external
systems (such as central smart payment terminals or payment sys-
tems). In addition, it can display detailed machine and programme
status information.
This module forms the basis for wired communication with
Miele MOVE.
It is not possible to integrate the machine into the "Miele@home"
app for domestic installations.
The communication module is intended exclusively for commercial
use and is supplied with mains voltage directly via the Miele Profes-
sional machine. No additional power connection is required. The
Ethernet interface provided via the communication module complies
with SELV (safety extra low voltage) requirements in accordance with
EN 60950. Connected external machines must also comply with
SELV.
The tumble dryer can be installed on a plinth (open or box plinth,
available as an optional Miele accessory).
Elevating the tumble dryer gives a better ergonomic working posi-
tion when loading or unloading.
 Risk of injury and damage due to missing fastenings.
When installing on a plinth, an unsecured tumble dryer can slip and
fall off the plinth.
If the tumble dryer is installed on an existing on-site plinth, it must
be secured.
The plinth must be secured to the floor.
en - Installation notes
29