Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5LWDR52XXXD Series Fan
CUL Model NO. : 5LWDR52XXD
RETAILER NAME:
RETAILER ADDRESS:
7.93 kg
17.45 lbs
Total fan weight with light
Advertisement
Related Manuals for Monte Carlo Fan Company Lowden 5LWDR52 D Series
Summary of Contents for Monte Carlo Fan Company Lowden 5LWDR52 D Series
- Page 1 Owner’s Guide and Installation Manual 5LWDR52XXXD Series Fan CUL Model NO. : 5LWDR52XXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 7.93 kg 17.45 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Cautions and Warnings WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70), including fire-rated construction. - Page 3 Before you begin installing the fan, Switch Before installing this fan make sure the Use metal outlet box suitable for fan power off at Service panel and lock outlet box is properly installed to the support and use only the screws provided service disconnecting means to prevent house structure.
-
Page 4: Safety Cable Installation
SAFETY CABLE INSTALLATION Lag screw Cross pin Slot Keeper pin Safety cable Washer Lock washer Slip downrod into motor housing yoke, Install ball end of downrod into mounting For Canadian installation and for USA fan aligning holes and install cross pin and bracket opening. - Page 5 Blade screw Blade Fiber washer Blade bracket LED light fixture Install blade bracket with blade by using Install the blade assembly to motor using Connect the light lead wires from fan to blade set screws and fiber washers the preinstalled screws. Tighten screws LED light fixture with a quick connector provided.
- Page 6 Remote Controller Operation Remove the battery cover from the remote control transmitter and install batteries. Replace the cover. This remote uses 2 1.5V/AAA batteries. Note: If not using for long periods of time, remove battery to prevent damage to remote DIM (D) transmitter, and store the remote transmitter away from excess heat or humidity.
- Page 7 Install Transmitter wall mount cradle with 2 screws provided. Useful tips: Take remote transmitter up by pushing it at lower area of the transmitter. The remote transmitter can be held on magnetic metal materials by a magnet built in the transmitter. Wall mount cradle THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
-
Page 8: Troubleshooting
Trouble Shooting or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. - Page 9 Jun.2021 Dec.2021 update step 11 with step screw...
Need help?
Do you have a question about the Lowden 5LWDR52 D Series and is the answer not in the manual?
Questions and answers