Hookups With A Cable Box/Direct Broadcast System; Recording/Viewing Any Channel - Philips VR960BPH Hook-Up Instructions

Hookup pages
Hide thumbs Also See for VR960BPH:
Table of Contents

Advertisement

8 Hookups with a Cable Box/Direct Broadcast System

There are two ways to connect your Cable Box/DBS to the VCR. With this connection:
You may view any channel.
You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.
You may not view a channel other than the one you are recording.
You may not set up channels at the VCR.
You can only program a timer recording for one channel at a time if you are not using the Controller.
Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4
switch to the same channel. Set your Cable Box/DBS to the channel you want to record. When you
enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS
output channel). (This is step 3 on page 40.) Leave the Cable Box/DBS on for a timer recording.
To set up the Controller, see pages 49-53.
Cable Box/DBS
IN
1
Cable signal
2
Connections
1
Connect a Cable signal to the IN jack on the Cable Box/DBS.
2
Use an RF coaxial cable (supplied) to connect the OUT jack on the
Cable Box/DBS to the ANT(enna) IN jack on the VCR.
3
Use a second RF coaxial cable to connect the RF OUT jack on the
VCR to the TV's ANTENNA IN jack.

Recording/Viewing Any Channel

1
With the VCR on and in VCR position (the VCR light will appear
on the display panel), use the CH(annel) 8/9 button to set the
VCR to the Cable Box/DBS output channel (channel 03 or 04).
2
Set the TV to the same channel to which you set the VCR. Set the
CH3/CH4 switch on the VCR to the same channel.
3
Select the channel you want to view/record at the Cable Box/DBS.
OUT
OUT
IN
S
V
I
D
E
O
RF coaxial cable
VCR
CABLE
IN
IN
OUT
OUT
ANT.IN
BOX
R
AUDIO
L
RF OUT
VIDEO
CH3 CH4
• If you are using Record Link, use
audio and video cables to connect
the AUDIO/VIDEO OUT jacks on
the Cable Box/DBS to the
AUDIO/VIDEO IN jacks on the back
of the VCR. Details are on page 35.
7 5
A N T
/
C A B
L E
ANTENNA
IN jack
3
RF coaxial cable
Helpful Hint
TV's

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents