UNI-T UT71B Operating Manual page 3

l
When the Meter working at an effective voltage over
60V in DC or 30V rms in AC, special care should be
taken for there is danger of electric shock.
l
Use the proper terminals, function, and range for
your measurements.
l
If the value to be measured is unknown, use the
maximum measurement position.
l
Do not use or store the Meter in an environment of
high temperature, humidity, explosive, inflammable
and strong magnetic field. The performance of the
M e t e r m a y d e t e r i o r a t e a f t e r d a m p e n e d .
l
When using the test leads, keep your fingers behind
the finger guards.
l
Disconnect circuit power and discharge all high-
voltage capacitors before testing resistance,
continuity, diodes.
l
Before measuring current, check the Meter's fuses
and turn off power to the circuit before connecting
the Meter to the circuit.
l
Replace the battery as soon as the battery indicator
appears. With a low battery, the Meter might
produce false readings that can lead to electric
shock and personal injury.
8
Model UT71A/B/C/D/E: OPERATING MANUAL
l
When servicing the Meter, use only the same model
number or identical electrical specifications
replacement parts.
l
The internal circuit of the Meter shall not be altered
at will to avoid damage of the Meter and any accident.
l
Soft cloth and mild detergent should be used to
clean the surface of the Meter when servicing. No
abrasive and solvent should be used to prevent the
surface of the Meter from corrosion, damage and
accident.
l
The Meter is suitable for indoor use.
l
Turn the Meter off when it is not in use and take out
the battery when not using for a long time.
l
Constantly check the battery as it may leak when it
has been using for some time, replace the battery
as soon as leaking appears. A leaking battery will
damage the Meter.