UNI-T UT71B Operating Manual page 12

Model UT71A/B/C/D/E: OPERATING MANUAL
Button
RECALL
Recall feature:
STORE
Recall the stored value. Press EXIT to exit the Recall feature.
Setup feature:
In Setup, press to select OFF at the selection of HIGH and
LOW
Hold feature:
Peak HOLD
HOLD
Press HOLD to freeze the displayed value. Press EXIT to
release the display.
Peak Hold feature:
Press to access Peak Hold feature, the primary display
shows PEAK HOLD. Press EXIT to exit.
l In Setup, each press to select the digit you want to edit.
l
In Recall, press to enable SEND feature
l In Store, press to toggle between clearing all the stored
reading or start storing reading from the current index number.
Table 2-2. Functional Buttons
Description Access Method
Press and hold the button for over 1
second
Press the button
once after entering Setup mode.
Press the button once.
Press and hold the button for over 1
second.
Press the button once after entering
Setup or Recall or Store mode.
17