Samsung DW60B 8 Series User Manual page 29

STEP 9 Final check
1. Remove all foam, paper packaging, and unnecessary parts from inside the dishwasher.
2. Turn the power circuit breaker on.
3. Open the water supply valve to supply water to the dishwasher.
4. Plug in and turn the dishwasher on. Then, select and run the Express cycle.
5. Check if the dishwasher turns on normally and if there are any water leaks while the
dishwasher is operating. Make sure to check for water leaks on both ends of the water
line and the drain hose connector.
FULL_DW60BB890UAPET_DD68-00254C-00_EN.indd 29
3. Insert the drain hose into the holder so
that the drain hose is positioned 30 cm
to 80 cm from the bottom.
4. Connect the drain hose to the drain
outlet.
CAUTION
• Install the drain system properly so that
the drain hose does not come out of the
drain outlet in the draining process.
• Make sure that the drain hose, supply
hose, and power cord is not kinked or
folded.
English 29
2023-03-09 6:27:36