1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Dishwasher
  5. DW60M9970 Series
  6. Installation manual

Samsung DW60M9970 Series Installation Manual

Hide thumbs Also See for DW60M9970 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Dishwasher
Installation manual
DW60M9970**/DW60M9550**/DW60M9530**
DW9000M_DD68-00193B-02_EN.indd 1
2018-04-10
12:58:48

Advertisement

Table of Contents
loading

Related Manuals for Samsung DW60M9970 Series

Summary of Contents for Samsung DW60M9970 Series

  • Page 1 Dishwasher Installation manual DW60M9970**/DW60M9550**/DW60M9530** DW9000M_DD68-00193B-02_EN.indd 1 2018-04-10 12:58:48...

  • Page 2: Table Of Contents

    Contents What’s included Installation kit (provided) Installation kit (not provided) Tools required (not provided) Installation requirements Power supply Grounding Water supply To reduce a risk of leaks: Aqua Stop Drain Flooring Ambient temperature Test run Step-by-step installation Cabinet dimensions SBI (Semi Built-In, DW60M9***S*) models FBI (Fully Built-In) models Skirting board Pre-cut skirting board (DW60M9****US Series)

  • Page 3: What's Included

    Make sure all the parts are included in the product package. If you have a question about the dishwasher or the parts, contact a local Samsung customer centre or your retailer. The actual appearance of the dishwasher may differ, depending on your model and country.
  • Page 4 Installation SBI (Semi Built-In, DW60M9***S*) Top brackets (2 ea) Ø4 X 12 screws Protective sticker Sub foot (8 ea) Custom panel Ø4 X 43 screws Ø4 X 16 screws Rubber skirt fixers (wood panel (4 ea) (2 ea) holders, 2 ea) 5 mm wood spacers (7 ea) BU (Built Under, DW60M9***U*)

  • Page 5: Installation Kit (Not Provided)

    Installation kit (not provided) Hose clamp Tools required (not provided) Safety glasses Gloves Flashlight Wrench (22 mm) for the front foot Torx T20 Pliers Nipper Tape measure Pencil Phillips screwdriver Flat head Cutting knife screwdriver Level Hole saw English 5 DW9000M_DD68-00193B-02_EN.indd 5 2018-04-10 12:58:50...

  • Page 6: Installation Requirements

    • Do not modify the power plug of the immediately. Then, contact a local dishwasher. If the power plug does Samsung customer centre or a qualified not fit the outlet, have a proper outlet technician. installed by a qualified electrician.

  • Page 7: Drain

    Drain Ambient temperature If you are using a drain system dedicated Do not install the dishwasher in an area to the dishwasher, connect the drain hose exposed to freezing temperatures. The to a drain system that is between 30 cm dishwasher always retains some water in and 70 cm off the ground.

  • Page 8: Step-By-Step Installation

    Installation Step-by-step installation The installation procedure may differ depending on the model. STEP 1 Select a location Select a location that meets the following conditions. • The location must have a solid floor that can support the weight of the dishwasher. •...

  • Page 9: Cabinet Dimensions

    Cabinet dimensions NOTE Check if the distance between the floor and the bottom of the worktop is more than 860 mm. If so, replace the rear foot with the sub foot included in the installation kit. For details, see the next section.
  • Page 10 Installation STEP 2 To replace the rear foot If the distance between the floor and the bottom of the worktop is more than 860 mm, replace the rear foot with the sub foot provided before starting installation. 1. Lay the dishwasher on its back. CAUTION Do not lay down the dishwasher to a side.
  • Page 11 4. Find the sub foot in the installation kit. Insert the sub foot into the hole of the rear foot’s place, and then turn the screwdriver clockwise to tighten the sub foot. 5. When the sub foot is fixed, turn the front foot to align with the sub foot.
  • Page 12 Installation STEP 4 Arrange the hoses 1. Clean the bottom of the countertop. 2. Attach the protective sticker as shown. 3. Arrange the power plug, the water hose, and the drain hose. 4. Pull them through the sink hole. CAUTION •...
  • Page 13 STEP 5 Level the dishwasher For FBI (Fully Built-In) models, go to STEP 6 and install the custom panel first. Then, return to the current step (STEP 5) and level the dishwasher. You can adjust the height of the dishwasher to level it. Note that in these steps, the dishwasher is currently inserted halfway.

  • Page 14: Sbi (Semi Built-In, Dw60M9***S*) Models

    Installation STEP 6 Install the custom panel (SBI/FBI models only) SBI (Semi Built-In, DW60M9***S*) models 1. Insert the supplied rubber skirt (A) into the 3 holes at the bottom of the door. (applicable models only) NOTE If the rubber skirt is wider than the dishwasher, cut the skirt to match the width of the dishwasher.
  • Page 15 SBI (Semi Built-In, DW60M9***S*) models 3. Fully insert the dishwasher under the countertop. 4. Align the top of the installation template to the bottom of the dishwasher’s door handle. 5. On both sides of the installation template, mark the spot according to your alignment.
  • Page 16 Installation SBI (Semi Built-In, DW60M9***S*) models 6. Put the installation template on the back of the custom panel. • For A: Align the marks on the installation template to the top edge of the custom panel. • For B: Align the marks on the installation template to the bottom edge of the custom panel.
  • Page 17 SBI (Semi Built-In, DW60M9***S*) models 10. Pull out the dishwasher halfway from under the countertop. 11. Attach single or multiple wood spacers whose overall height fills the gap between the sink cabinet and the control panel. • The gap here is the same as the measurement in step 5 above.
  • Page 18 Installation SBI (Semi Built-In, DW60M9***S*) models 12. While holding the custom panel, attach it to the door and insert the custom panel fixers (B) into the corresponding holes near the bottom of the door as shown. 13. Push the custom panel upward to fix. 14.
  • Page 19 SBI (Semi Built-In, DW60M9***S*) models 15. Secure the custom panel to the door by fastening the 4 screws (Ø4 X 43). 16. Refer to the table below and adjust the spring level by turning the spring screw with Torx T20 screwdriver on the front of the dishwasher.

  • Page 20: Fbi (Fully Built-In) Models

    Installation FBI (Fully Built-In) models 1. Insert the supplied rubber skirt (A) into the 3 holes at the bottom of the door. (applicable models only) 2. Put the installation template on the back of the custom panel and fix it temporarily using transparent tape.
  • Page 21 FBI (Fully Built-In) models 5. While holding the custom panel, attach it to the door and insert the custom panel fixers (B) into the corresponding holes at the top of the door as shown. 6. Push the custom panel downward to 30 mm fix.
  • Page 22 Installation FBI (Fully Built-In) models 9. Open the dishwasher door and remove the 2 screws. CAUTION Use caution when opening the door. The door might open or close unexpectedly if the spring level is not adjusted appropriately, resulting in physical injury. 10.
  • Page 23 STEP 7 Secure the dishwasher You can use the brackets to secure the dishwasher to the countertop. Alternatively, you can drill the side holes to secure the dishwasher to the cabinet sides. To the countertop using the brackets 1. Insert the provided brackets into the top front holes of the dishwasher as shown.
  • Page 24 Installation To the sides 1. Use a flat-head screwdriver to remove the middle and bottom caps from both sides of the dishwasher. CAUTION Do not remove the top caps on both sides of the dishwasher. 2. Tighten the 4 screws (Ø4 X 12). 3.
  • Page 25 STEP 8 Connect the drain hose 1. Detach the hose holder from the dishwasher, and then cut off the protruding part from the holder as shown. 2. Fix the holder to a wall by tightening the 2 screws (Ø4 X 12). 3.
  • Page 26 Installation STEP 9 Final check 1. Remove all foam, paper packaging, and unnecessary parts from inside the dishwasher. 2. Turn the circuit breaker on. 3. Open the water supply valve to supply water to the dishwasher. 4. Plug in and turn the dishwasher on. Then, select and run the Quick cycle. 5.

  • Page 27: Skirting Board

    Skirting board You can attach the skirting board according to the model or installation conditions. Pre-cut skirting board (DW60M9****US Series) 1. Insert the provided brackets to the bottom of the dishwasher. Turn them into position. • See the figure on the left for the correct attaching sequence and place of the brackets.

  • Page 28: Skirting Board

    Installation Skirting board 1. Put the skirting board on the bottom of the dishwasher. 2. Open the door of the dishwasher, and draw a baseline on the skirting board where it interferes with the door. 3. Follow the baseline and cut the skirting board using a saw.

  • Page 29: Kick Plate (Applicable Models Only)

    Kick plate (applicable models only) If you want to install the kick plate, follow these steps. 1. Put the lower felt behind the kick plate, and arrange them so that the holes on the felt are visible. 2. Turn the front feet of the dishwasher to adjust the height so that the kick plate fits in.
  • Page 30 Installation 3. Attach the kick plate to the dishwasher using the kick plate brackets. Make sure the kick plate brackets are in the correct direction. See the figure for details. English DW9000M_DD68-00193B-02_EN.indd 30 2018-04-10 12:58:57...
  • Page 31 Memo English 31 DW9000M_DD68-00193B-02_EN.indd 31 2018-04-10 12:58:57...
  • Page 32 DD68-00193B-02 DW9000M_DD68-00193B-02_EN.indd 32 2018-04-10 12:58:57...

This manual is also suitable for:

Dw60m9550 seriesDw60m9530 series

Table of Contents