Table of Contents
Advertisement
STEP 5 Level the dishwasher
For Built-In models
FULL_DW60BB890UAPET_DD68-00254C-00_EN.indd 25
7. This is the completion of mounting the
custom panel.
You can adjust the height of the dishwasher
to level it. Note that in these steps, the
dishwasher is currently inserted halfway.
1. Use the level to check if the dishwasher
is level.
2. To adjust the front height, use a 22 mm
wrench.
• To lower the height, turn the foot
counter clockwise.
• To raise the height, turn the foot
clockwise.
3. To adjust the rear height, insert the Torx
T20 screwdriver in the bottom center of
the dishwasher.
• To lower the height, turn the
screwdriver clockwise.
• To raise the height, turn the screwdriver
counter clockwise.
4. When levelling is complete, check if the
door opens and closes properly.
English
25
2023-03-09
6:27:35
Advertisement
Table of Contents
