Table of Contents
Advertisement
Technical specifications
7.5 Technical specifications of SCALANCE XC206-2SFP EEC
Technical specifications
Design
Housing material
Properties
Degree of protection
Dimensions (W x H x D)
Weight
Installation options
Mean time between failure (MTBF)
MTBF (EN/IEC 61709; 40 °C)
Wiring rules
1)
Observe the wiring rules (Page 51).
Pluggable transceiver
2)
Detected with the SFP992-1ELH. You will find the precise values in the operating
instructions of the pluggable transceivers, see the section "Introduction", Additional
documentation (Page 5).
Ambient temperature with SFP
3)
The maximum ambient temperature during operation depends on the operating elevation
and the installed pluggable transceivers, see also the section "SFP transceiver (Page 19)" in
the "Accessories" section.
Operating altitude
Up to 2000 m
2000 m to 3000 m
3000 m to 4000 m
68
compact
Basic housing
Front cover
Coated printed circuit board (conformal coating)
IP20
60 x 145 x 125 mm
520 g
Wall mounting
•
Installation on a DIN rail
•
Mounting on an S7-300 standard rail
•
Mounting on an S7-1500 standard rail
•
> 47 years
Pluggable transceiver type
LD
-40 °C to +65 °C
-40 °C to +60 °C
-40 °C to +50 °C
Die cast aluminum, powder coated
Polycarbonate (PC-GF10)
LH, LH+, ELH, ELH200 or SFP992-1+
-40 °C to +60 °C
-40 °C to +55 °C
-40 °C to +45 °C
Operating Instructions, 04/2018, C79000-G8976-C442-04
SCALANCE XC-200
Advertisement
Table of Contents
