Siemens SIMATIC NET SCALANCE XC-200 Operating Instructions Manual page 6

Introduction
Designations used
Table 1- 1 Explanation of designations used
Classification Description
Product line The product line includes all devices and variants of all product
groups.
If information applies to all product groups within the product line, the
term SCALANCE X-200 is used.
Product group If information applies to all devices and variants of a product group,
the term SCALANCE XC-200 is used.
Device If information relates to a specific device, the device name is used.
Device group If information applies to a specific group of devices, a corresponding
abbreviation is used.
If information applies to all gigabit variants of SCALANCE XC-200, the
following terms are used.
You can recognize the gigabit variants by the suffix "G" in the type
designation. Devices that only support gigabit via SFPs are not con-
sidered gigabit variants (e.g. SCALANCE XC206-2SFP).
If information applies to all SCALANCE XC-200 with coated circuit
boards, the following terms are used.
You can recognize the EEC variants by the suffix "EEC" in the type
designation.
Additional documentation
In addition, note the Operating Instructions of the pluggable transceivers.
You will find the supplementary documentation here:
● On the data medium that ships with some products:
– Product CD / product DVD
– SIMATIC NET Manual Collection
● On the Internet pages of Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/15247)
Documentation on configuration
You will find detailed information on configuring the devices in the following configuration
manuals:
● SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Web Based Management
● SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
6
Terms used
SCALANCE X-200
SCALANCE XC-200
e.g. SCALANCE XC206-2SFP
SCALANCE XC-200G,
gigabit variants
SCALANCE XC-200EEC,
EEC variants
Operating Instructions, 04/2018, C79000-G8976-C442-04
SCALANCE XC-200