Ppr Emulation - Oki C510 User Manual

ITEMS
PEN WIDTH ADJUST
TRAY ID#
MP TRAY
TRAY 2
PPR
EMULATION
This menu controls settings effective when the printer is operating in PPR emulation mode.
ITEM
CHARACTER PITCH
FONT CONDENSE
CHARACTER SET
SYMBOL SET
LETTER 0 STYLE
ZERO CHARACTER
LINE PITCH
WHITE PAGE SKIP
CR FUNCTION
LF FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
SETTINGS
ON/OFF
1 ~ 4 ~ 59
1 ~ 5 ~ 59
SETTINGS
10 CPI; 12 CPI;
17 CPI; 20 CPI;
PROPORTIONAL
12CPI TO 20CPI
12CPI TO 12CPI
SET-1
SET-2
IBM-437
(Default Symbol Set
only shown)
DISABLE
ENABLE
NORMAL
SLASHED
6 LPI; 8 LPI
OFF / ON
CR / CR+LF
LF / LF+CR
80 COLUMN; 136
COLUMN
11 INCH
11.7 INCH
12 INCH
0.0INCH ~ 1.0INCH
0.0INCH ~ 1.0INCH
Menu functions > 50
EXPLANATION
When minimum width is specified in PCL, sometimes a
1-dot line, looks broken.
With PEN WIDTH Adjust set to ON, when the minimum
width is specified, the line width will be emphasized so
as to look wider than a 1-dot line.
With PEN WIDTH Adjust set to OFF, the line will appear
as before.
Sets the # to specify the MP tray for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
Sets the # to specify Tray 2 for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
(Displayed only if Tray 2 is installed).
EXPLANATION
Specifies character pitch in IBM PPR emulation.
Specifies 12CPI pitch for Condense Mode.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH with letter o and
9DH with a zero
Sets the zero to be slashed or unslashed.
Specifies the line spacing.
Selects whether blank pages are printed or not.
Selects whether a received carriage return character
(0Dh) also causes a line feed.
Selects whether a received line feed character (0Ah)
also causes a carriage return.
Specifies the number of characters per line.
Specifies the length of paper.
Specifies the distance of print from the top edge of the
paper.
Specifies the distance of print from the left hand edge
of the paper.