Table of Contents
Advertisement
Memory Viewer function menu
Memory Viewer function
The Memory Viewer function is to make a presentation or project an image without using computers
or some other external equipment. You do not have to carry a computer or other equipment to project
images.
Store images on a dedicated USB (Universal Serial Bus) thumb drive and insert it into the USB port
(Series A) of the projector, then you can project those images.
Which images can be projected with the Memory Viewer function?
With the Memory Viewer function, you can project images in these formats below.
• Bitmap data
• JPEG data
• Text data
JPEG data used with Memory Viewer
Memory viewer does not support the resolution of image greater than 8191 x 8191 pixels.
Text data used with Memory Viewer
Memory viewer supports the text file with the ASCII format for single byte. Other text formats cannot
be supported.
Back up the data
It is recommended that important data to edit with Network Viewer (See Wireless Manager mobile edition 5.5)
and store in USB thumb drive should be stored in other media in advance. We are not responsible for any data
losses or damages resulting from use of the Memory Viewer function.
USB thumb drive for the Memory Viewer function
„
Inserting the USB thumb drive
„
Direct start-up into the memory viewer mode
„
Entering the memory viewer mode
„
Displaying the memory viewer browser window
„
Termination of memory viewer
„
Formatting the USB thumb drive
„
38
→ See page 39
→ See page 40
→ See page 41
→ See page 42
→ See page 43
→ See page 43
→ See page 39
Advertisement
Table of Contents
