Panasonic PT-VX400NTE Operating Instructions Manual page 14

Hide thumbs Also See for PT-VX400NTE:
Table of Contents

Advertisement

NETWORK menu (continued)
When setting [OPEN] or [SHARED] as authentication and setting [WEP] as the
z
encryption method:
Default key
KEY1 – 4
When using [WPA-PSK] or [WPA2-PSK] :
z
When the authentication method is [WPA-EAP/WPA2-EAP], [WPA-EAP], [WPA2-EAP]:
z
1: "Glossary" (
If you are unable to connect to the wireless LAN through the access point even after performing the steps
in "Projector settings (See page 22)", contact the manufacturer of the access point.
When using EAP, the projector needs to be set according to the setting of the RADIUS server. Check with
the network administrator for the setting of the RADIUS server.
When using an EAP together with an access point with invalid SSID broadcast, select WAP-EAP or
WAP2-EAP for the authentication method even if the authentication method of the access point is WPA-
EAP/WPA2-EAP.
Default settings of [USER 1] - [USER 3]
The following settings as [USER1] - [USER3] in the wireless LAN are set before the projector leaves the
factory.
SSID
DHCP
IP address
Subnet mask
Default gateway
Mode
Authentication
Encryption
Channel
DNS 1/DNS 2
14
: Set 1 – 4 numerals for the default key.
: Set a WEP key to the key number selected with [Default key].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key,
input five alphanumerics (or a 10-digit string for the hexadecimal format)
for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the
hexadecimal format).
Set a key.
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal
format.
Set [EAP], [USER NAME], and [PASSWORD].
EAP
1
USER NAME:
PASSWORD:
See page 44 – 45)
Panasonic Projector
Off
192.168.11.100
255.255.255.0
192.168.11.1
AD HOC
OPEN
NONE
11
NONE
:
Select the EAP setup in the RADIUS server
EAP that can be selected are as follows.
PEAP
(MS-CHAPv2
1
EAP-TTLS
1
EAP-FAST
1
Input a user name used for authentication (excluding
spaces)(maximum 64 characters).
Input a password used for authentication (maximum 64
characters).
), PEAP
(GTC
1
1
(MD5
), EAP-TTLS
1
(MS-CHAPv2
), EAP-FAST
1
. Types of
1
),
1
(MS-CHAPv2
),
1
1
(GTC
)
1
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vx400ntuPt-vx400ntea

Table of Contents