Table of Contents
Advertisement
GB
4
INSTALLATION
The installation must be carried out by a professional.
Note
Mains supply requirements
High power equipment may, due to the primary current drawn from the mains supply, influence the
power quality of the grid. Therefore connection restrictions or requirements regarding the
maximum permissible mains impedance or the required minimum supply capacity at the interface
point to the public grid may apply for some types of equipment (see technical data). In this case it
is the responsibility of the installer or user of the equipment to ensure, by consultation with the
distrubution network operator if necessary, that the equipment may be connected.
4.1
Location
WARNING
Secure the equipment - particularly if the
ground is uneven or sloping.
S
Place the welding power source on a level foundation.
S
Make sure there is nothing to prevent the cooling.
Lifting instructions
bb04de
- 7 -
© ESAB AB 2009
Advertisement
Table of Contents
