Stanley FATMAX SFMCD710D2K Original Instructions Manual page 11

EC declaration of conformity
%
MACHINERY DIRECTIVE
SFMCD710 - Drill
Stanley Europe declares that these products described under
2006/42/EC, EN62841-1:2015, EN62841-2-1 2018+A11 2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Stanley
Europe at the following address or refer to the back of
the manual.
For more information, please contact Stanley at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Stanley.
Stanley, Egide Walschaertsstraat 14-18
Patrick Diepenbach
General Manager, Benelux
2800 Mechelen, Belgium
30.12.2021
(Original instructions)
Declaration of conformity
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
SFMCD710 - Drill
STANLEY FATMAX declares that these products described
under "technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019. These
products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact STANLEY FATMAX at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of STANLEY FATMAX.
Vice President Professional Power Tools EANZ GTS
ENGLISH
Karl Evans
STANLEY FATMAX UK,
270 Bath Road, Slough
Berkshire SL1 4DX
England
30.12.2021
11