Start Up Your Synology Nas - Synology DS220j Hardware Installation Manual

5 Replace the upper case, and tighten the screws on the back panel.

Start Up Your Synology NAS

1 Connect one end of the AC power adapter to the power port of your Synology NAS. Connect the other end to a
power outlet.
2 Use the LAN cable to connect the Synology NAS to your switch, router, or hub.
3 Press the power button to turn on your Synology NAS.
Congratulations! Your DS220j is now online and detectable from a network computer.
10 Chapter 2: Hardware Setup