Start Up Your Synology Nas - Synology DS120j Hardware Installation Manual

Start Up Your Synology NAS

1 Push the button on the adapter provided in the package and pull out the plug case as illustrated below.
2 Slide the plug adapter provided into the slots by pushing it downward. Note that the plug adapter that comes
with your Synology NAS varies depending on your region. The image below is for reference only.
3 Connect one end of the AC power adapter to the power port of the Synology NAS. Connect the other end to a
power outlet.
4 Use the LAN cable to connect the Synology NAS to your switch, router, or hub.
5 Press the power button to turn on the Synology NAS.
Congratulations! Your Synology NAS is now online and detectable from a network computer.
10 Chapter 2: Hardware Setup