Table of Contents
Advertisement
Synology DS220j at a Glance
No.
Article Name
1
Status Indicator
2
LAN Indicator
3
Disk Indicator
4
Power Button
5
Fan
6
LAN Port
7
USB 3.0 Port
8
Reset Button
Kensington
9
Security Slot
10
Power Port
4 Chapter 1: Before You Start
Location
Displays the status of the system. For more information, see "LED Indicator
Table".
Displays the status of the network connection. For more information, see "LED
Indicator Table".
Front Panel
Displays the status of the installed drive. For more information, see "LED
Indicator Table".
1. Press to power on the Synology NAS.
2. To power off the Synology NAS, press and hold until you hear a beep sound
and the Power LED starts blinking.
Disposes of excess heat and cools the system. If the fan malfunctions, the
Synology NAS will emit a beeping sound.
Connect a network cable here.
Connect external hard drives or other USB devices to the Synology NAS here.
1. Press and hold until you hear a beep sound to restore the default IP address,
DNS server, and password for the admin account.
Back Panel
2. Press and hold until you hear a beep sound, then press and hold again until
you hear three beep sounds to return the Synology NAS to "Not Installed"
status so that DiskStation Manager (DSM) can be reinstalled.
Attach a Kensington security lock here.
Connect the AC power adapter here.
Description
Advertisement
Table of Contents
