Start Up Your Synology Nas - Synology DS1821+ Hardware Installation Manual

7 Repeat the steps above to install the other drives you have prepared.
8 Drives are numbered as shown below.
Note:
If you plan to create a RAID volume, we recommend installing drives of identical size to make the best
use of drive capacity.

Start Up Your Synology NAS

1 Use the LAN cable to connect the Synology NAS to your switch, router, or hub.
2 Connect one end of the AC power cord to the power port of your Synology NAS. Connect the other end to a
power outlet.
1
2
3 Press the power button to turn on your Synology NAS.
Congratulations! Your Synology NAS is now online and detectable from a network computer.
13 Chapter 2: Hardware Setup
1 2 3 4 5 6 7 8