Subscribe to Our Youtube Channel
Related Manuals for Agria 5500 CT
Summary of Contents for Agria 5500 CT
- Page 1 T T T T T ool Car ool Car ool Car ool Car ool Carrier rier rier rier rier 5500 CT 5500 CT 5500 CT 5500 CT 5500 CT 998590 07.07 agria-Werke GmbH • D-74219 Möckmühl • Tel. +49(0)6298/39-0 • Fax +49(0)6298/39-111...
-
Page 2: Check The Machine
5500 CaneThumper® Quick start guide Before commissioning the machine please read operating instructions Check all fluids, settings, warnings and safety instructions ! Check the machine Operating instruction Service manual and documents Tools with the machine in black toolbox in black box on board Prior to operating the machine and after 10 hours Check oil level Clean cooling system... - Page 3 5500 CaneThumper® Quick start guide Start motor (step by step) (1) Push safety circuit lever (2) Pull clutch lever (3) lock clutch lever with pawl (left handlebar) (left handlebar) (left handlebar) (4) Set speed control lever to max (5) Pull rope hard and fast to start (3) Let rope glide back (right handlebar) the engine (stand to left side)
- Page 4 5500 CaneThumper® Quick start guide Operations Wear individual safety equipment like safety shoes and ear plugs ! Changing gears 1-4 and F/R requires pulling the clutch ! Do not shift the gears by force . If necessary pull and release the clutch to bring the gears in easy switchable position ! Hold safety lever, pull clutch Choose gear with the shifting lever For F/R motion...
-
Page 5: Differential Lock
5500 CaneThumper® Quick start guide Differential Lock (right handlebar) Release throttle and discharge drive for easy on/off switching the differential Lock Differential Lock engaged = Differential Lock disengaged = Set pawl to disengage Differential improved traction Lock easy steering especially in curves forward and reverse permanently Move the machine without the motor running... -
Page 6: Handlebar Adjustment
5500 CaneThumper® Quick start guide Coupling and decoupling Implements Mount and dismount attachments only with engine switched off ! 1. Disconnect PTO shaft (attachment) Slide pegs (2) of tool carrier Fold both eye bolts (1) = move lever (4) to pos. “0” into hooks (3) of attachment over coupling flange 2. - Page 7 5500 CaneThumper® Quick start guide Page 7 of 7 07.07 B...
- Page 8 Your local agria specialist dealer:...
Need help?
Do you have a question about the 5500 CT and is the answer not in the manual?
Questions and answers