"Remove the hinge covers" on page 27
"Remove the C cover LCD panel" on page 28
"Remove the force brackets" on page 32
Note: Make sure the camera cable and the EDP cable have been torn from the fan modules.
Step 1.
Remove the two hinge rubbers (1).
1
Figure 27. Remove the hinge rubbers
Step 2.
Rotate the top screen LCD module until it is vertical (2).
Figure 28. Rotate the top screen LCD module
Step 3.
Remove six screws (3) and then remove the top screen LCD module (4).
1
.
Chapter 4
Removing a FRU or CRU
41