Table of Contents
Advertisement
1
3
4
Figure 12
SSI-M Solid State Infinite Control with Manual Timer
CONTROL DESCRIPTION
1. SELECTOR SWITCH - controls power to the oven for
2. BLOWER SWITCH - controls blower speed, either hi
3. LIGHTS SWITCH - controls interior lights.
4. OVEN READY LIGHT - when lit indicates burner op-
2
5. SOLID STATE THERMOSTAT - allows either 8 pre-
60 HZ
only
6. TIMER - activates an electric buzzer that sounds
OPERATION
1. Turn the SELECTOR Switch (1) to COOK. The blower
5
2. Set BLOWER Switch (2) to the desired speed.
3. Set the SOLID STATE THERMOSTAT (5) to the de-
4. Preheat until the OVEN READY LIGHT (4) goes out.
6
5. Load product into the oven. Determine cook time and
6. When the buzzer sounds, remove the product from
7. Turn the SELECTOR Switch (1) to OVEN OFF.
17
Operation
cook or cool down.
or lo. Two speed not available in 50 Hz.
eration. When the light goes out the oven has reached
operating temperature.
set temperatures to be selected in accordance with
customer requirements, or an infinite selection of
temperatures from 200-500°F (95-260°C). (infinite
control shown)
when the cook time expires.
and control compartment cooling fan operate and are
controlled automatically by the action of the doors.
sired setting or temperature.
set the TIMER (6).
the oven. Turn the TIMER knob (6) to OFF to silence
the buzzer.
WARNING!!
A complete five minute shutdown must be
observed before the oven is relighted.
Advertisement
Table of Contents
