Diamond Multimedia HP200AV User Manual page 8

User Manual
Label Label
Label Label
A
Simple Connect Simple Connect
Simple Connect Simple Connect
B
Power Power
Power Power
Powerline Activity Powerline Activity Powerline Activity Powerline Activity
C
D Ethernet Activity Ethernet Activity
Ethernet Activity Ethernet Activity
E Ethernet Port Ethernet Port Ethernet Port Ethernet Port
F Reset to Factory Default Reset to Factory Default Reset to Factory Default Reset to Factory Default
Page 8 of 43
Status Status Description/ Function Description/ Function
Status Status Description/ Function Description/ Function
Press to create or join a HomePlug AV network. It can
also be used to reset the Private Network Name to a
random key.
Blinking When LED is blinking slowly in Green color HomePlug AV
slowly is on a Power Saving status.
Off No power.
•
On
•
Off Device is not connected to a HomePlug AV network.
•
On
•
•
Off An Ethernet device is not connected.
•
On
•
Accepts either cross or straight Ethernet cable.
Press for 2 seconds to reset to the factory default
settings. When you reset to the factory default, all your
configuration changes will be removed.
After Simple Connect
seconds, this LED will blink to confirm the
button press.
When Simple Connect
seconds, this LED will blink to confirm the
Private Network Name reset.
This LED remains on when the device is part of
a HomePlug AV network.
The LED colors represents the connection rate
within the HomePlug AV network whether it is
good (red), better (amber), or best (green).
The LED flashes to indicate network activity.
An Ethernet device is connected.
The LED flashes to indicate Ethernet activity.
is pressed for two
is pressed for 10