Diamond Multimedia HP200AV User Manual page 11

Step 3
Press Simple Connect
HomePlug Y. After you release the button,
the Power LED will blink. If the Power LED
did not blink, press Simple Connect
again for two seconds.
Make sure to press Simple Connect
HomePlug Y within two minutes after you
press Simple Connect
The LEDs on both devices will switch off and
on twice to signify that they are searching
for another device to pair with.
Note: Do not press Simple Connect for more than 2 Note:
Note: Note:
seconds
for two seconds on
on
on HomePlug X.
User Manual
Page 11 of 43