Table of Contents
Advertisement
User Manual
Determining Connection Rate
Each LED color of the Powerline Activity
rating can only be calculated when the device is part of an existing network. The exact
connection rate value can also be viewed using HomePlug AV Utility.
Good (Red)
Connection rate is
less than 30 Mbps
Power Saving Mode
When Power LED blinks slowly in Green color HomePlug AV is on a
Power saving status.
Conditions for HomePlug AV to go on a Power saving mode:
Will go on a power saving mode after 15mins.
-
There should be no Ethernet link.
-
When connected to a PC or Laptop there should be no power on the network card
-
when the computer is OFF.
Page 18 of 43
represents a connection rating. The connection
Better (Amber)
Connection rate is
between 30 to 80 Mbps
Best (Green)
Connection rate is
more than 80 Mbps
Advertisement
Table of Contents
