Table of Contents
Advertisement
User Manual
Home
Home provides a list of all the possible tasks you can perform in the HomePlug AV Utility.
To start a task, you first need to select the network card connected to your HomePlug AV.
This is most helpful when you have more than one network card in your computer. When
you select a network card, the MAC Address of the HomePlug AV connected to your
computer appears. If there is no HomePlug AV connected to your computer, no MAC
address will appear.
After selecting the network card, there are four possible tasks you can perform. These
tasks include:
• Change the Private Network Name
• Change the QoS settings
• View devices in the network
• Upgrade the firmware
When you select any task, you will be forwarded to the tab for the selected task.
Home
Home
Home
Home
Page 26 of 43
Advertisement
Table of Contents
