Table of Contents
Advertisement
User Manual
Step 3
Press Simple Connect
on HomePlug Z. After you release the
button, the Power LED
Power LED
did not blink, press Simple
Connect
again for two seconds.
Make sure to press Simple Connect
HomePlug Z within two minutes after you
press Simple Connect
network.
The LEDs on both devices will switch off
and on twice to signify that they are
searching for another device to pair with.
Note:
Note: Do not press Simple Connect for more than
Note:
Note:
2 seconds.
Step 4
To
confirm
if
the
established, check the LEDs. The Power
LEDs
and the Powerline Activity LEDs
on all HomePlugs are on.
Page 16 of 43
for two seconds
will blink. If the
on
from the existing
connection
was
Advertisement
Table of Contents
