Table of Contents
Advertisement
If the Powerline Activity LED
HomePlug Z is off, this means the pairing
was not successful. You need to repeat
the process again.
Step 5
Unplug HomePlug Z and then connect it to your Ethernet device using the Ethernet cables
from the product package. After connecting the Ethernet cable, plug HomePlug Z directly
to a wall outlet. An Ethernet-enabled device can be a router, computer, hub, gaming
console, IP phone, network printer, or IP TV set-top box.
Note: HomePlug AVs work best when connected directly to a wall socket. Avoid plugging it to a power strip
Note:
Note:
Note:
or power extension. The other electrical devices in the power strip create noise that may affect the
performance of the HomePlug.
on
User Manual
Page 17 of 43
Advertisement
Table of Contents
