Table of Contents
Advertisement
User Manual
To create a HomePlug AV network using Simple Connect:
Step 1
Plug your HomePlug AVs side by side where
you can easily observe the LED behavior.
Upon connection, the LEDs will blink
simultaneously and then the Power LED
lights on steadily.
Step 2
Press Simple Connect
HomePlug X. After you release the button,
the Power LED
will blink. If the Power LED
did not blink, press Simple Connect
again for two seconds.
Note: Do not press Simple Connect for more than 2
Note:
Note:
Note:
seconds.
Page 10 of 43
for two seconds on
Advertisement
Table of Contents
