Number Of Rings; Remote Access Code; Message Alert Tone - VTech CS6124-11 User Manual

Answering system settings

Number of rings

You can choose from two, three, four, five or six rings; or toll saver. With toll
saver selected, the answering system answers after two rings when you have
new messages, and after four rings when you have no new messages. This
enables you to check for new messages and avoid paying unnecessary long
distance charges if you are calling from outside your local area.
Press MENU/
1.
CID or
2. Press
3. Press CID or
CID or
4. Press
CID or
5. Press
/SELECT to confirm your selection. You hear a confirmation tone.
MENU

Remote access code

A two-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can set the code
from 00 to 99.
1. Press MENU/
CID or
2. Press
CID or
3. Press
4. Press CID or
5. Press the dialing keys (0-9) to enter the code or
00 to 99, then press
confirmation tone.

Message alert tone

This telephone beeps every 10 seconds to alert you of new messages. The
tone stops when all new messages have been reviewed. Press MENU/
when the handset is not in use.
To turn this feature on or off:
Press MENU/
1.
CID or
2. Press
CID or
3. Press
CID or
4. Press
CID or
5. Press
confirm your selection. You hear a confirmation tone.
• The answering system must be turned on for the message alert tone
to function.
Press any key on the telephone base (except /FIND HANDSET) to temporarily
•
silence the message alert tone.
when the handset is not in use.
SELECT
to select Answering sys, then press
to select Ans sys setup, then press
to select
to choose from 6, 5, 4, 3, 2 or Toll saver, then press
when the handset is not in use.
SELECT
to select Answering sys, then press
to select Ans sys setup, then press
to select Remote code, then press
/SELECT to confirm your selection. You hear a
MENU
when the handset is not in use.
SELECT
to select Answering sys, then press
to select Ans sys setup, then press
to select Msg alert tone, then press
to choose On or Off, then press
#
of rings, then press
23
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
CID or
to select from
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
/SELECT to
MENU
SELECT